LOT OF 3 PIECES AS IN PICTURE

THE 2 black levers are 3d printed and have a different cosmetic appearance than the OEM part, however they will function and fit perfectly same as oem.

SHIPS DDP TO USA - BUYER PAYS NO TRUMP TARIFFS, BROKERAGE FEES OR IMPORT FEES!!!

Lot of Technogym Run/Jog Treadmill Joystick upper and lower parts.

Normally these are sold as separate parts. Included as a set for your convenience: 

2x AFTERMARKET JOYSTICK LEVER - FITS SAME AS S0N000192AA-GG JOYSTICK LEVER (BLACK)

1x S0G000261AB-GB UPPER COVER SET (Yellow)

The yellow upper covers do not usually break, it is the joystick lever that typically breaks. 

Installation tip: slowly and gently compress/pry the yellow tabs inwards and then into the slots with a thin metal pick or very small flat screwdriver.  the levers (grey part) break very easily. 

removing old lever may take some force. even installing new one - recommend putting some silicone lube or synthetic grease on the hexagonal steel joystick shaft before installation. 

keywords: Technogym joystick speed incline grade increase decrease lever handle control paddle switch

location: O-FES-B3

LOT OF 3 PIECES AS IN PICTURE

SHIPS DDP TO USA - BUYER PAYS NO TRUMP TARIFFS, BROKERAGE FEES OR IMPORT FEES!!!

Lot of Technogym Run/Jog Treadmill Joystick upper and lower parts.

Normally these are sold as separate parts. Included as a set for your convenience: 

2x S0N000192AA-GG JOYSTICK LEVER (Grey)

1x S0G000261AB-GB UPPER COVER SET (Yellow)

The yellow upper covers do not usually break, it is the joystick lever that typically breaks. 

Installation tip: slowly and gently compress/pry the yellow tabs inwards and then into the slots with a thin metal pick or very small flat screwdriver.  the levers (grey part) break very easily. 

removing old lever may take some force. even installing new one - recommend putting some silicone lube or synthetic grease on the hexagonal steel joystick shaft before installation. 

keywords: Technogym joystick speed incline grade increase decrease lever handle control paddle switch

Location: O-FES-B3

This is a brand new, Premium Quality running belt for Technogym Run excite treadmills.  This belt requires lubrication.

 With proper maintenance this belt will last as long or longer than the factory oem part.

Also backward compatible with previous belt p/n 0k000221AD (lube type) on all machines.

Price includes shipping within Canada & USA.

Technogym Run/Jog Treadmill Wellness, Visio or Unity Lift Elevation Motor 

THIS IS A PREVIOUSLY USED PART, TESTED AND IN GOOD WORKING ORDER. 

PART # 0WR00747AC (older number) updates to S0WR00873AC INTERCHANGEABLE

If you are getting "com" errors, and the error log shows multiple Error 7 - that is elevation motor encoder error - it is likely the incline motor is starting to fail (intermittent errors are common in this scenario). If motor encoder fails the incline motor must be replaced.      

Technogym Factory OEM, high quality 12AWG, 20 amp, 120volt, Length: 8 feet, straight connectors - will fit any 120V Technogym Treadmill.  Male end: Nema 5-20P    Female end: C19

Will work on any equipment type using these ends and rated up to 20amp max.

Technogym Factory OEM, high quality 12AWG, 20 amp, 220-240volt, Length: 8 feet, straight connectors - will fit any 220-240V Technogym Treadmill.  Male end: Nema 6-20P    Female end: C19

Will work on any equipment type using these ends and rated up to 20amp max.

**Hospital Grade** - optimum ground and can withstand tighter radii bends without damage. larger plug body for safety, clear male plug may be lit. Looks similar to pictured but male end has round clear plug body. 

Technogym Factory OEM, high quality 12AWG, 20 amp, 120volt, Length: 8 feet, straight connectors - will fit any 120V Technogym Treadmill.  Male end: Nema 5-20P    Female end: C19

Will work on any equipment type using these ends and rated up to 20amp max.

Originally Technogym Factory OEM, but will fit any equipment using these ends.  high quality 12AWG, 20 amp, 120volt, 11 feet, 5 inches. 90 degree connector - will fit nearly any 120V Technogym Treadmill.  Male end: Nema 5-20P    Female end: C19

Will work on any equipment type using these ends and rated up to 20amp max.

Technogym Factory OEM, high quality 12AWG, 20 amp, 220-240volt, 11 feet, 5 inches. 90 degree male connector - will fit any 240V Technogym Treadmill.   Male end: Nema 6-20P    Female end: C19.  

Will work on any equipment type using these ends and rated up to 20amp max.

SHIPPING INCLUDED!!  Tested & Pulled from working treadmill. USED - HAS SOME BEARING NOISE - 

Technogym Run Excite 700 900 OEM Treadmill foot rests Pair R0006727AA-GG New 

Technogym Run Excite 700 900 OEM Running Deck NEW in box pn R0002570AC/AD

Technogym Run/Jog Treadmill Wellness, Visio or Unity Lift Elevation Motor 

PART # 0WR00747AC (older number) updates to S0WR00873AC INTERCHANGEABLE

If you are getting "com" errors, and the error log shows multiple Error 7 - that is elevation motor encoder error - it is likely the incline motor is starting to fail (intermittent errors are common in this scenario). If motor encoder fails the incline motor must be replaced.      

Tag on part has the following:   Model # LM35     Power Rating 24VDC 3.5A   Load Capacity: 6000N (max)      Stroke length: 200mm    Item: N500091261

ALE Driver board (220V), fits the following models:
RUN NOW 500 / 700 / 900 (DAK)  
DAK8EL / DAK8AL / DAK82L / DAK81L / DAK8UL / DAK9EL / DAK9AL / DAK92L / DAK91L / DAK9UL / DAK6EL / DAK6AL / DAK62L / DAK61L / DAK6UL
UNITY DAK8EV / DAK8AV / DAK82V / DAK81V / DAK9EV / DAK9AV / DAK92V / DAK91V
VISIO TS-CAPACITIVE (D****Y)  DAK9EY / DAK8EY / DAK82Y / DAK81Y / DAK92Y / DAK91Y
JOG NOW 500 / 700(DAK) UNITY
DAK3EV / DAK3AV / DAK32V / DAK31V / DAK2EL / DAK2AL / DAK2UL / DAK22L / DAK21L / DAK3EL / DAK3AL / DAK3UL / DAK32L / DAK31L